Anamet is pleased to announce the addition of Gunther Dieckmann, PhD, to our Chemistry Staff. 

Gunther joins Anamet after nearly 30 years as a research chemist at Chevron in Richmond, California, the last 17 of which serving as Senior/Lead Research Chemist. 

Gunther's major accomplishments include starting Chevron's hydrogen fuel cell program for PEM fuel cells, serving as key technical lead in Chevron's radio frequency heating project, and discovering a low-cost sulfur resistant Ni-based reforming catalyst.      

The addition of Gunther to our staff enhances Anamet's chemical analysis capabilities and reflects our long-standing commitment to provide high quality materials testing services to the petroleum refining industry.   

Gunther can be reached at 510.887.8811 x 106 or gunther@anametinc.com.

 

 

________________________________________________________________________________________________________________

 

 

 

Another New Testing Capability Now Available at Anamet!

Anamet, inc. welcomes the Instron 1000HDX-G7C to the collection of high-end test equipment in our Mechanical Testing department. With a load capacity of up to 225,000lbf (1000kN), this machine is ideal for high-load tension, compression, bend/flexure and shear tests for the following applications:

Instron 1000HDX-G7C
Photo Courtesy of Instron

  • High strength bolts & nuts
  • Welded joints
  • Reinforcing bar up to size #14
  • Specialty fasteners
  • High Strength metal bars & plates
  • Custom fixtures & components requiring high proof load testing
  • Fiber reinforced composites

 

Anamet, inc. continually invests in state-of-the-art laboratory equipment and in the professional development of our staff to assure your confidence in our test results and engineering evaluations.
Our new Instron 1000HDX is in service and available now!
Call us at 510-887-8811 or send an email to info@anametinc.com to discuss your high-load testing needs.

New Analytical Capabilities Offered in Chemistry Lab!

Anamet, inc. is now able to produce metal analysis for Nitrogen and Oxygen at concentrations as low as 0.5 ppm with great precision. This capability is key to meet certain alloy specifications for Stainless Steel Grades (e.g. Duplex, Precipitation Hardened, Nitronics), Copper and Copper Alloys, Titanium Alloys and more!

Oxygen    Leco Oxygen Nitrogen Analyzer Nitrogen
Photo Courtesy of LECO Corporation

 

Anamet, inc. continually invests in state-of-the-art laboratory equipment and in the professional development of our staff to assure your confidence in our test results and engineering evaluations.
Please contact us with inquires about this new chemistry capability or any other chemistry, mechanical or metallurgical testing needs.
26102 Eden Landing Road, Suite 3, Hayward, CA 94545 | info@anametinc.com | 510.887.8811 Local | 1.800.377.7768 Toll-free